[Spridgets] Bench bleeding Brake Master Cylinder

[John Kuzman]

Monty,
 
I screw a brake bleeder into the MC outlet, attach a tube to the bleeder
nipple, run the tube back into the MC and just bleed it like a wheel
cylinder.. When finished, I tighten the bleed screw and leave it in place
until I re-mount the MC.
 
John 

--- On Fri, 2/13/09, Monty Love <cmlove at knology.net> wrote:

From: Monty Love <cmlove at knology.net>
Subject: [Spridgets] Bench bleeding Brake Master Cylinder
To: spridgets at autox.team.net
Date: Friday, February 13, 2009, 2:31 PM

Thanks to all who replied about the brake push rod question.

I was wondering about "Bench bleeding" the Brake Master Cylinder.  I
have a
good idea of why you do that and I think how, except for the how of hooking
up tubes to the outlets to run back into the main reservoir.  Do you use
plastic tubing?  1/4in.?  Any help would be appreciated.

Charles M. "Monty" Love
Dynetics, Inc.
256-461-2780
256-337-5581 (Cell)
256-882-1543 (Home)
ET Test

The greatest revolutions come not by the discovery of something new. They
happen when someone radically changes or challenges what was always there.
You are subscribed as jjkan5 at yahoo.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets