[Spridgets] Water pump

[fastvee]

When you install a larger water pump pulley, sometimes there is a clearance problem between the underside of the cylinder head and the pulley, and the head must be
ground for clearance. Mostly race applications where the block deck and head are planed excessively. There is plenty of clearance between the pulley
and thermostat housing.
John
Fogelsville, PA

--- On Tue, 1/20/09, cclabaw at juno.com <cclabaw at juno.com> wrote:

I think that there are alternative thermostat housings (like the one that came
on the '67 1275) that allow you to use the bigger pully without having
clearance problems.