[Spridgets] engine bearings

[Dean Hedin]

Yes, have the shop measure the crank first.

It is entirely possible that some time long ago, in a galaxy far..far away, that your crank was already ground.

----- Original Message ----- 
From: "Edward Perez" <eap2140 at yahoo.com>
Subject: Re: [Spridgets] engine bearings


> That's what I needed to know.  You saw the crank, so it looks like I should get off with only polishing it.  So the .020 bearings 
> are only if I need to grind the crank.  If I only polish it, I'll get the standard bearings.  I'll see what the shop says. 
> Thanks.