[Spridgets] fitting bugeye grille

[Linda Grunthaner]

Phil pics look nice : )
Lin

On Sun, Jun 7, 2009 at 10:42 AM, Phil Nase <nases at verizon.net> wrote:

> The original bugeye grille had a stud top dead center just below the bonnet
> badge.  When doing the metal work on my bonnet the shop welded up the hole.
>
> My options are to cut off the stud which I really don't want to do or drill
> open the hole.
>
> Will I be able to drill thru the weld?  If so how do I get a pilot hole in
> there to locate the hole?  I really don't want to mess up a beautiful paint
> job.
>
> Thanks.
>
> Phil Nase
> Quakertown, PA
> http://home.comcast.net/~philnasecpa/<http://home.comcast.net/%7Ephilnasecpa/>
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as grunthaner at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets