[Spridgets] clamp on line?

Peter Caldwell peter at nosimport.com
Thu Jun 25 17:09:09 MDT 2009


2-11/16"

Peter

But, I will say that if you ever need to clamp a brake/clutch hose, 
the proper tool is 2 smooth bars that squeeze the hose. Failing that, 
I've used 2 smooth bolts squeezed with vise grips.

====

At 12:30 PM 6/25/2009, Marc wrote:
>Thanks - One more question - whats the correct length of of the 
>slave pushrod from center of the hole to the end of the rod?  Of 
>interest for a '73...
>
>Peter Caldwell wrote:
>>Easier and safer for the line is to fill the MC completely, stretch 
>>a plastic bag over the mouth and tighten cap back on. You have now 
>>"put your thumb on the straw" and fluid won't leak.... much. Then 
>>install slave, open bleeder and walk away whilst imbibing a beer. 
>>It'll be bled by the time you're done with your second.
>>
>>Peter C
>>=====
>>
>>At 11:44 AM 6/25/2009, Marc wrote:
>>>I want to change a slave cylinder - Can I clamp the hose to 
>>>prevent losing all the fluid without damage to the hose?
>>>
>>>--
>>>
>>>Marc
>
>--
>
>Marc
>
>
>
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.5.375 / Virus Database: 270.12.91/2201 - Release Date: 
>06/25/09 06:22:00


More information about the Spridgets mailing list