[Spridgets] Under bonnet clearance

Linda Grunthaner grunthaner at gmail.com
Sun Mar 29 03:08:18 MST 2009


Interesting way to make a mould. I wounder if you spray oil on the plastic
if the foam will peel of after dry. I think I can use this in class on
student projects. My students found that they were able to make silicone
gaskets by milling out the shape on a wax block as the silicone pops right
out of the wax mould when dry.Lin

On Thu, Mar 26, 2009 at 9:05 AM, Michael Rowe <mdrowe at optonline.net> wrote:

> Get a large plastic bag from a laundry or some such.  Lay it over the area
> you want to measure.  If the bag is really thin, put another protective
> layer of plastic over and under.  Squirt a can of foam insulation into the
> bag and close the top on it.  You will get a mold of the available space.
>
> Michael Rowe _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as grunthaner at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list