[Spridgets] Under bonnet clearance

[Larry Daniels]

Back in my racing days we used a two-part polyurethane foam for custom 
fitting formula car race seats.  It may be a bit pricey for what you want, 
but it works well.  We got it from Pegasus in Milwaukee.  Undoubtedly, you 
can get the same thing for less from a non-racing supply house.

LAD



----- Original Message ----- 
From: "Hal Faulkner" <frog.aye at gmail.com>
To: "Ed's Shop" <shop at justbrits.com>
Cc: "Spridgets" <spridgets at autox.team.net>
Sent: Sunday, March 29, 2009 8:03 PM
Subject: Re: [Spridgets] Under bonnet clearance


My experience with using canned foam inside plastic is that it doesn't
work!  The solvent needs to be able to evaporate in order for the foam to
harden.  Sprayed it into a plastic bag and waited.  Several minutes later
when I touched it the foam all collapsed like a cheap Cappucino.  Left with
a plastic bag full of a sticky, smelly mess that may or may not have
hardened inside the garbage bin.  could try it inside paper, however.

Hal
You are subscribed as ladaniels at sbcglobal.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets