[Spridgets] Turn signals

[Richard Ball]

Michael

Once you get it out of the consol try removing the toggle and cleaning the 
contacts before you replace it.  It's a simple design inside, 6 little 
button contacts and an H shaped lever that rockes up or down making contact 
when the toggle is rocked into the on possition.  Mine had failed completely 
when I removed it.  Cleaned the contacts and it has worked perfect since.

Rich Ball
'76 Midget
Everett, Wa
----- Original Message ----- 
From: "Michael Rowe" <mdrowe at optonline.net>
To: "Spridget Chat Group" <spridgets at autox.team.net>
Sent: Wednesday, October 07, 2009 9:19 AM
Subject: [Spridgets] Turn signals


> >I lost my turn signals,
>
> Problem found, not solved.
>
> A jumper across the green wires at the hazard switch box confirmed a bad 
> switch.  How to get it out without special pliers?  The barbs have poor 
> access on one side and several varieties of profanity have failed. 
> Perhaps I should learn to swear in Chinese.
>
> It occurs to me that Chinese profanity might be useful for many other LBC 
> problems as well.  Perhaps we should arrange for an online training 
> course. I have friends from Taiwan and China who might contribute.
>
> Michael Rowe
> '74 Midget
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as richb at u.washington.edu
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets