[Spridgets] gear reduction starter

[Robert E. Shlafer]

It did on mine. :)

One thing with GR starters. Make sure your battery is up to snuff "dynamically" (test it under load every now and then) or, you can burn the contacts out in the GR starter's solenoid in no time at all. 

Ask me how I know??! :)
 

Cap'n. Bob      '60 :{)


-----Original Message-----
From: Phil Nase
Sent: Sunday, September 13, 2009 12:24 PM
To: spridgets Spridgets at autox.team. Net
Subject: [Spridgets] gear reduction starter

I'm installing a gear reduction starter on my bugeye.  The seller says  
it's OK to bypass the starter internal solenoid with a jumper wire to  
the other battery wire.  Will it work on spridget with the stock  
starter switch with the bypass?  What are you guys doing with the  
wiring?

Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
You are subscribed as pilotrob at webtv.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets