[Spridgets] Need some ID help-

[Dean Hedin]

I think the 948 and 1275 clutch is held on by 6 bolts.
And yes, you can adapt a 1275 diaphram clutch to fit a 948
flywheel by carefully locating and drilling the flywheel an inserting 
the two pins.   I have such a flywheel.    

The clutch changed on the 1098 but I think the flywheel 
holes might be the same as the 948.


----- Original Message ----- 
From: "Bill Masquelier" <billmasq at hotmail.com>
To: "spridget list" <spridgets at autox.team.net>
Sent: Monday, April 05, 2010 6:47 PM
Subject: [Spridgets] Need some ID help-


>I know that a 948 flywheel has 4 bolt holes and that a 1275 has 4 boltholes
> and two dowel holes (to the crank) but what is the pattern for a 1098?
> 
> Thanks
> BillM
> 
> _________________________________________________________________
> Hotmail is redefining busy with tools for the New Busy. Get more from your
> inbox.
> http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
> :en-US:WM_HMP:042010_2
> _______________________________________________
> 
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/dlh2001@comcast.net