[Spridgets] BE Bonnet seal

[PAUL SHERMAN]

That is the seal that I just purchased and should get to it any day. The one I
have was from Moss I think, a real pain in the ass. Hate to pull it out but
will.
Paul

> From: robertduquette at sympatico.ca
> To: spridgets at autox.team.net
> Date: Tue, 24 Aug 2010 17:28:08 +0000
> Subject: Re: [Spridgets] BE Bonnet seal
>
> I'm just curious ...
> Has anyone tried MacGregor's seal?  If so, how did it fit?
> http://preview.tinyurl.com/2b3jdly
>
> Robert Duquette
> Ottawa ON Canada
>
>
> > From: an5.sprite at gmail.com
>
> > I had the same problem, plus the seal I bought was way too stiff. Ended
up
> not using it and buying a universal fit weather strip that was flat on the
> bottom with double stick tape and had a hollow foam 1/2 circle on top.
> >
> > Steve
>
> > -----Original Message-----
> > From: "Mark Haynes" <haynes386 at netzero.net>
> >
> > I just bought a bonnet seal from Sports & Classics for Chips (the'58)and
> > installed it in the cowl channel last night with the V-groove upwards.
When
> I
> > close the bonnet, it's WAY too tall (~3/8" above the cowl). I remember
> someone
> > had this issue last year, so I thought that I'd ask the pertinent
> questions-1)
> > Did I install this wrong? and 2) How much needs to come off the backside
of
> > the seal to fit correctly?
> >
> >
> > Mark Haynes
> > HAN6L12779
> > HAN5L8016
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/montpaul@msn.com