[Spridgets] what does a shortblock weigh?

[BJNoSHOV8]

I need to pull the engine out of my little car.  The head is off, and I 
intend to pull the block separate from the transmission.  Approximately 
how much does the block/pistons/cam/crank/pan/waterpump weigh?

I'm doing this in my garage so I'm going to build a rigging to do the 
job.  I had the idea that I could use a block and tackle to do the 
lifting.  I haven't checked to see what I can get from tool rental 
places but I can buy a 1 ton chain hoist from HarborFreight for $45, and 
they have a rope hoist with 500# capacity for $7.  This would be a 
pretty cheap job if the rope hoist would work.  I'm guessing that the 
complete shortblock is around 150#.  Almost seems like I could reach in 
there and pull it out by hand.