[Spridgets] disconnecting front motor mounts?

[Frank Clarici]

On 11/14/2010 5:57 PM, BJNoSHOV8 wrote:
> Preparing for pulling the engine-
>
> 1. At what point do you disconnect the front motor mounts?

Disconnect the 2 nuts from engine side of the left mount (steering 
column side)
Disconnect the 3 bolts from the frame on the right side.
This makes it easier to pull the engine, once it's up a little remove 
the 2 nuts from the engine for a little added clearance if you want.

If you are only pulling the engine, pull the starter, otherwise it can 
come out with the whole mess.

-- 
Frank Clarici
Toms River, NJ