[Spridgets] Balking starting when hot.

[Chris King]

And the solenoid is by the heater box on a 1500 on the drivers side,
right?

maybe loose connections there?

-=Chris

Chris King
http://home.comcast.net/~kvcbk/

<-----Original Message-----> 
>From: dlancer7676 at comcast.net [dlancer7676 at comcast.net]
>Sent: 9/15/2010 7:32:53 PM
>To: bmwwxman at gmail.com
>Cc: spridgets at autox.team.net
>Subject: Re: [Spridgets] Balking starting when hot.
>
>This is a 1500--there is no heat shield on the 1500.B 
>
>--David C.
>B Life is like a roll of toilet paper. The closer it gets to the end,
the
>faster it goes.
>
>
>
>
>
>----- Original Message -----
>From: "Jim Johnson" <bmwwxman at gmail.com>
>Cc: "Spridgets" <spridgets at autox.team.net>
>Sent: Wednesday, September 15, 2010 5:43:57 PM
>Subject: Re: [Spridgets] Balking starting when hot.
>
>On Wed, Sep 15, 2010 at 11:42 AM, B <uniquelittlecars at yahoo.com> wrote:
><snip>
>> While our LBC's did not have a heat shield.
></snip>
>
>What? B I could be mistaken but I pretty sure there is a metal heat
>shield between the carbs and the exhaust manifold on both the 1098 and
>1275 engines. B Mine is gone because I am using a Titan intake manifold
>and HIF44 single carb but both sets of H2 carbs that I had as spares
>had a heat shield on them....
>--
>Cheers!!
>Jim
>"The problems that exist in the world today cannot be solved by the
>level of thinking that
>created them."-Albert Einstein
>Suggested annual donation B $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/dlancer7676@comcast.net
>_______________________________________________
>
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/cbking@alum.rpi.edu
>
>.