[Spridgets] Wire Patch

[Jack Laird]

Prob just an old weak fuse.



----- Original Message ----- 
From: "Kirk Hargreaves" <khargreaves2 at gmail.com>
To: <bmwwxman at gmail.com>
Cc: "Spridgets" <spridgets at autox.team.net>
Sent: Wednesday, June 01, 2011 7:02 PM
Subject: [Spridgets] Wire Patch


> Thanks. .  .
>
>
> I patched the two wires by wrapping a piece of thin copper wire taken off
> another wire where I broke apart the wire strands to get just a thin piece
> of wire to wrap around the re-assembly before soldering.  This held it in
> place for the soldering job and gave the solder a bit more to grab on too.
>
> The wire ends also had to be cleaned up as they were tarnished and dirty. 
> I
> used a wire brush on the end of my drill and cleaned up the ends so that
> they were back to shiny clean before applying the solder.  . then followed
> up with the heat shrink tubing.
>
> It must have been a one time shock to the system of some sort as 
> everything
> is running fine with no further issues.
>
>
> Thanks,
>
> Kirk
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/spridgets/jlaird237@cox.net
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1375 / Virus Database: 1511/3673 - Release Date: 06/01/11