[Spridgets] Rib Case - Rebuild Question/s

[Dave Yealy]

I use a coffee can and a rubber band off the celery you get at the 
grocery store.  Haven't lost a ball or spring since.

Dave



At 06:51 PM 9/27/2011, you wrote:
><< ...watch for the detent balls and plungers and springs.  >>
>I seem to remember that someone (Frank Maybe) used a hose clamp of appropriate
>size with a few of the slots cut out to hold the detent balls in place so that
>you can rotate the hose clamp to a hole, install a spring and ball, and rotate
>to the next hole, etc. then slide the outer gear over as the hose clamp slides
>off. then just disassemble the hose clamp. NO pain, no drama, no stinkin'
>balls flying thru the air.
>
>Mark Haynes
>It only goes one way-Pay it Forward
>HAN6L12977
>HAN5L8016
>
>
>
>__________________