[Spridgets] [midgetsprite] Progress... 68 Midget

[" Just Brits " Shop]

<< On 3/27/2012 6:26 PM, Jim Johnson wrote:
             Four of them alone contain the suspension bits ...... >>

For the BEST results I have had over the years, AFTER chem bath and then
media blasting, ("Skat-Blast" *_IS_* *BEST* at LOW pressure) I rinse 
any/all parts
with "Busty" or paint thinner.
[ http://www.tptools.com/dg/183_Abrasive-Blasting-Media.html ]

Next, everything gets a coat [ ONE (1) ] of "Extend" or "Rust Treatment"
[ Permatex Part # 81849 ].  Let dry/cure thirty-six (36) hours.  When 
ready to
Final Coat Paint, rinse as above & let dry a hour or so.  Every part 
'seems' to be
different !?!?!?

Foregoing is followed by a SINGLE coat of Eastwood "Chassis Black" ! ! !
[ http://www.eastwood.com/chassis-black ]

Whilst the stuff is not cheap, it IS the hardest coating besides 
actual Powder
Coating you will ever see/use ! ! !

If you can't find either "Extend" or "Rust Treatment", I have 
in-stock.  Ditto
"Busty" [ which Frank used <G> & Diane nor Tiff NEVER said a word 
<VBEG> ] ! !!

Good Luck and "enjoy", Jim <VBEG> ! ! !

Ed
Please visit MY site at:
www.justbrits.com