[Spridgets] New radius arm bushing

[Peter Caldwell]

Burn the rubber, sawzall the steel. New ones press/hammer in.  The OD 
of the bush is too thin to find a suitable pressing out tool.... it's 
virtually the same thickness as the replacement bush. You're lucky if 
you can see it.
         Peter C
==
At 12:58 PM 9/12/2012, Alan wrote:
>I am about to install new radius arm bushing in a bugeye
>I see that they came as a an assembly and need to be pressed into the arm
>itself
>Before I remove the old arms do they need to be pressed in as with a bench
>press or is it more of a slip fit?
>I call a few comments a while back
>Thanks
>Alan
>------------------------