[Spridgets] Bad batch of Condensers

[Dean Hedin]

Martyn,

You can measure the condensors with a capacitance meter.  Typically
automotive condensors are about 0.2-0.3 uf.

Assuming that one mode of failure is that they short internally, then you
can just put the multi-meter on 
continuity check and see if the condensor is shorted. 

-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Martyn Ridley
Sent: Sunday, May 12, 2013 4:43 PM
To: spridgets at autox.team.net
Subject: [Spridgets] Bad batch of Condensers

Just as there was a bad batch of black rotors several years ago there now
seems to be a bad batch of condensers out there.  How do you tell the good
from the bad?

Cheers,
Martyn
------------------------

spridgets at autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/dlh2001@comcast.net