[Spridgets] Broken Rear Axle: reprise

[Rick Fisk]

Wierd.  All of the axles I've ever swapped worked fine - from Bugeyes to my
'79 Midget.  Early axles to late axles all fit with no issues.  Pull it back
out and measure it's length.  I'm going to go measure a few spares in the
garage and we can compare measurements.

Sent from my keyboard

> On Jul 4, 2014, at 3:01 PM, Brad Fornal <tequila.brad at gmail.com> wrote:
>
> I removed the axle, it was broken in the pumpkin. I removed the pumpkin,
> removed the pieces, and put it all back together. I put the original axle
> back in, no problems,
> Now, the replacement axle, will not go all the way in. It lacks about 1/16"
> of going flush. I hear a clink, so I know it is hitting metal somewhere. Do
> I put the wheel on, and cinch it down, or are there various size cups on
> the rear of the flange, where one could be too small, not allowing it to
> seat properly.
> Any advice or tips?
>
> Brad
>
> --
> DON JULIO 1942
>
> http://tequilabrad.com/
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net