[Spridgets] Aluminum Head torque Specs?
corvallis at peoplepc.com
corvallis at peoplepc.com
Mon Aug 10 03:45:15 MDT 2015
Does this help? Bill in Oregon
https://www.google.com/#q=1275+aluminum+head+torque+spridget
This may be a hlpe on the Titan rocker valve lash:
https://www.google.com/#q=Titan+1.5+roller+rockers.valve+lash
_____
From: Spridgets [mailto:spridgets-bounces at autox.team.net] On Behalf Of brian
S via Spridgets
Sent: Sunday, August 09, 2015 8:21 PM
To: spridgets list
Subject: [Spridgets] Aluminum Head torque Specs?
hey all,
I was hoping someone out there would happen to know the torque specs for and
aluminum head.
It's a 1275, I believe a Pierce head. I've run it about 500 miles or so
since it was installed so,
I figured that I should re-torque the head.
I went through my personal archives and didn't see any mention of it.
I've sent an email to the guy that built it, but haven't had a reply in a
few days,
and I know many of you are running them, so I thought I would ask the guru's
of the Spridgets list.
Also,
I should check the valve lash also,
any ideas of the clearance for that?
It has a Kent 276 cam and Titan 1.5 roller rockers.
It runs great, although the rockers do seem a bit noisy.
Thanks!
Brian S.
Bugeyeracer finally resto'ed!
Thanks to Frank C.!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20150810/8fe1e01d/attachment.html>
More information about the Spridgets
mailing list