[Spridgets] Bugeye Master cylinder reinstall issues

[ryan.kubanoff at comcast.net]

Thank you for all your tips! It turns out that when I switched pistons and i matched the length of the new with the old the new brake piston was to long and not releasing the pressure when i took my foot off of the pedal. It took 3! rotations off to get the pressure to drop so that I have half decent brakes . I need to bleed them and then see if i need to move it in or out to make it perfect. 

Thanks again for all your help and advice 
Ryan 

----- Original Message -----

From: "Ryan via Spridgets" <spridgets at autox.team.net> 
To: "spridgets" <spridgets at autox.team.net> 
Sent: Saturday, December 12, 2015 2:23:39 PM 
Subject: [Spridgets] Bugeye Master cylinder reinstall issues 

So bench bled rebuilt master. Installed in car. I have clutch with minor bleeding (me and the slave). But my brakes are frozen on. There is NO play in the pedal. There was a tiny bit but after the second stop sign the was NO play. I couldn't move it. What did I do wrong and how do I fix it? 

Sent from my iPhone 
------------------------ 

spridgets at autox.team.net 

Donate: http://www.team.net/donate.html 
Suggested annual donation: $12.75 

Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/ryan.kubanoff@comcast.net 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20151212/0da9a5a9/attachment.html>