[Spridgets] Seat spacers

[WeslakeMonza1330 at aol.com]

Hi Rick and the list,
 
I've spent ages thinking about this.  My seat is non-standard and I  think 
is tilted though I have plenty of leg room (seat is all the way  back).
 
The issue that occurred to me is that the studs in the seat are only just  
long enough to fasten to the seat frame so removing the seat frame means I 
need  a longer stud in the seat.  I haven't checked how easily the studs can 
be  removed.  The loss of the height of the seat frame also has to be  
compensated by the spacers.  So, the seat needs to come out before I can  get 
much further.  I also have a bunch of other stuff I need to work on  first so 
this project may go silent for a few weeks.
 
Regards
 
 
Daniel
 
 
In a message dated 14/01/2015 23:16:33 GMT Standard Time,  
healeyrik at gmail.com writes:

Daniel,  


Trying to remember the seat floor mounting set up, but instead of using  
the spacer bar, couldn't you just do away with them and use some nylon washers 
 under the individual mounting bolts?  An old trick for more leg room is  
to put more spacers under the front of the seat, tipping it back, and 
suddenly  ... more leg room.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20150115/571bea5d/attachment.html>