[Spridgets] Not LBC Generator flooded ideas?

[John Innis]

If there was a LOT of gas leaking into the cylinder, chances are a fair
amount leaked the rings into the oil.  You should really change the oil to
avoid scoring the cylinder and bearings when you start is back up.  Id
suggest also spraying a very small amount of light oil into the cylinder to
pre-lube the cylinder walls and rings.

On Mon, Jan 26, 2015 at 3:42 PM, Linda Grunthaner via Spridgets <
spridgets at autox.team.net> wrote:

> List,
> It appears I left the fuel valve on over the summer which is why I can't
> get my generator started. I pulled the plug and need to know a tip to dry
> the plug and get this baby started. It is new and only used an hr durning
> Super Storm Sandy. I have a can of electrical cleaner, starting fluid and
> canned air but I would have to dig around for much else or go to the store
> if they are still open. Only got 2 hrs of sleep last night and can't think
> of a thing other than dry the plug and let it sit.
>
> Manual if that helps.
>
>
> http://www.ujr.ca/EN/PDF_Support_Files/king_canada_tools/manuals/powerforce/KCG-5625G_manual-eng.pdf
>
> Thanks in advance.
>
> Lin
>
>
> PS Power was out Saturday and seems I'm in an area that gets hit 4x a year
> with power outs. Expecting 2' or more snow by tonight.
>
> ------------------------
>
> spridgets at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/jdinnis@gmail.com
>
>


-- 
=================================
= Never offend people with style when you   =
= can offend with substance --- Sam Brown  =
=================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20150126/b582c540/attachment.html>