[Spridgets] Brand new Facet fuel pump problem, no power.
WeslakeMonza1330 at aol.com
WeslakeMonza1330 at aol.com
Sat Jul 25 14:43:12 MDT 2015
Hi Lin
Is this a cube Facet or the cylindrical body pump? I doubt your original
pump is dead any more than the new one is. Both old and new Facet
cylindrical body pumps are noisy. I've just replaced one on my Sprite as it seemed
to be working harder than I expected it to at idle and just didn't sound
the same as it did a few months back. I tested the output with a pressure
gauge and it struggled to make 3 psi when wholly unregulated which is ok
because the 45 DCOE Weber on my carb needs less, but indicated it was worn. I
changed it for a new one which sounded better and unregulated made lots
more pressure.
What I would to test both pumps is simply use some jumper leads from a
good battery to the pump connections. A new pump is greased and will 'tick',
whereas be careful with the old pump as it may spray fuel.
Final thoughts, having spoken to Facet recently, is that there are a lot
cheap crap copies of their product, but I think your problem will be wiring.
Regards
Daniel
In a message dated 25/07/2015 19:29:49 GMT Daylight Time,
spridgets at autox.team.net writes:
I know my old 2 yr old Facet pump is dead because it no longer makes any
noise which it always does when I turn the key prior to starting.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20150725/912a11a5/attachment.html>
More information about the Spridgets
mailing list