[Spridgets] The Goldilocks Solution to backflowing master cylinder
mdrowe
mdrowe at optonline.net
Mon Aug 15 10:03:30 MDT 2016
I don't remember if I reported the full details of the solution to
backflowing in the master cylinder of a BE. The Goldilocks Solution:
1. If the master cylinder brake rod is too short, you can see fluid
squirting out of the small hole in the reservoir when the pedal is
released; pressure dies. Lengthen the rod until no fluid squirts out.
2. If the rod is too long, the brakes will seize up - immediately if
the rod is a lot to long, slower if it is only a little to long, with
the pedal getting shorter with each pump.
3. Between, the brake pedal gets shorter as the rod gets longer. Take
wrenches and drive around the neighborhood making very small changes
until the pedal is as short as you want it without locking the brakes.
Michael Rowe
The Holy Sprite
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20160815/be904e12/attachment.html>
More information about the Spridgets
mailing list