[Spridgets] Axle - Re: List Problem

WeslakeMonza1330 at aol.com WeslakeMonza1330 at aol.com
Mon Apr 24 14:44:11 MDT 2017


I've found a difference between when the axle casing is supported on axle  
stands and when a trolly-jack is jacking under the diff housing.
 
 
In a message dated 24/04/2017 05:30:05 GMT Daylight Time,  
spridgets at autox.team.net writes:

Mike,  are the splines absolutely straight. They have a tendency to twist 
due to  years of torque. Sometimes, a minor torque twist on the spline will 
prevent it  from seating all the way unless convinced. Also, is the flange 
square to the  shaft? A minuscule bend at the flange can prevent seating as 
well. Other than  that, look closely at the mating surfaces for a nick that 
could be preventing  a perfect seal.  


Good luck and let us  know,

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20170424/850c6695/attachment.html>


More information about the Spridgets mailing list