[Spridgets] April 11th

[James Gruber]

Paul, and easy to change out those Beehive Lamp sockets time the same two connector sockets as used up front and add LED turn signals. I did that and added a Red wire coming off of the LED Tail light array that also lights up the low power on the LED Bulb so those illuminate same us the upper brake light assembly. I left high power for turn signal. A simple addition. Or change just the sockets and use the 1157 bulb, 2 conductor bulb. 

Sent from my iPhone

> On Apr 19, 2020, at 7:13 PM, Paul Van Wig <pvanwig at mac.com> wrote:
> 
> 
> Just finished adding brake/tail light with 60 LEDs to the Bugeye. Looks great in daylight. 
> Paul Van Wig
> 
> Big Bear/Lakewood, CA
> 
> 
> 
>> On Sun, Apr 19, 2020 at 2:26 PM David Woerpel via Spridgets <spridgets at autox.team.net> wrote:
>> Hi all, Good to hear from you folks!  Enjoyed the videos Linda!  Rick is correct but no, I'm not done with it yet.  Had to sort out a bit of play in the MGA left front wheel.  I removed the hub but not the bearings, reinstalled and tightened it down past the castellated slot and still had had some play.  Grabbing the wheel at the top doesn't give me clunking sound but shaking it with hands at 9 and 3 positions gives me the slight play. I'm starting to suspect inner tie rod at the rack.  It's not that bad so will keep an eye on it. Would not have noticed it if I hadn't played with it to start with.  So, NOW on to the Sprite clutch slave remote bleeder.  Thanks Rick;  I'm an old guy and cellophane came from somewhere in my brain (lucky anything gets out of there!)  Plastic baggie it is.  Thanks for confirming.
>> 
>> Dave W.
>> 
>> Please stay at home and give our health care workers a break!
>> 
>> 
>> 
>> 
>> 
>> On 4/18/2020 11:06 AM, Linda Grunthaner via Spridgets wrote:
>>> Thanks for the tip Rick.
>>> Linda
>>> 
>>> On Sat, Apr 18, 2020 at 10:37 AM Rick Fisk <refisk at chartermi.net> wrote:
>>>> Hi Linda,
>>>> 
>>>> Yes, the cap has to be vented for normal use.  But Dave wanted to know if a piece of plastic bag or similar (not cellophane) under the cap would keep the master from draining while he replaced the line on his slave.  Yes, it will work Dave.  But you're probably all done by now.  :-)
>>>> 
>>>> Rick
>>>> 
>>>> Sent from my keyboard
>>>> 
>>>>> On Apr 18, 2020, at 10:30 AM, Linda Grunthaner via Spridgets <spridgets at autox.team.net> wrote:
>>>>> 
>>>>> 
>>>>> Hi Dave,
>>>>> Yes heavy heart every April RIP Frank.
>>>>> I thought the cap needed the hole open to breath and keep the fluid at proper pressure/nopressure on the master cylinder.
>>>>> 
>>>>> Will someone please explain?
>>>>> Linda
>>>>> 62 California Sprite "Pinky" 
>>>>> (California because Pinky came from LA and so did I)
>>>>> 
>>>>> PS found this fun video from 2015, enjoy.
>>>>> 
>>>>> https://www.youtube.com/watch?v=AzeIVufyRMA
>>>>> https://www.youtube.com/watch?v=AX8UEsHZzYo
>>>>> 
>>>>> 
>>>>> On Mon, Apr 13, 2020 at 5:30 PM David Woerpel via Spridgets <spridgets at autox.team.net> wrote:
>>>>>> Howdy folks,
>>>>>> 
>>>>>> Hope all is well with list members, that's you too Mark!  Assume people 
>>>>>> have been getting a lot of work done on their cars during this period of 
>>>>>> "house arrest".  I'm finally getting around to installing a remote 
>>>>>> clutch bleeder in the Bugeye.  Too many joints creaking and complaining 
>>>>>> contorting myself into the footwell. Does the cellophane under the M/C 
>>>>>> screw top work to prevent all the fluid draining out of the M/C?  I 
>>>>>> forgot the slave is supplied by a hard line.
>>>>>> 
>>>>>> Also, I pause today to remember our friend and mentor, Frank. Still have 
>>>>>> (always will) the WWFD sticker on my car and tool box. By extension we 
>>>>>> remember Paul A.; another mentor and guru in his own right.  Miss you 
>>>>>> guys.  You taught us well.
>>>>>> 
>>>>>> Stay safe, stay home and work on your cars and the endless Honey Do list 
>>>>>> our wives keep dreaming up.  Be well friends.
>>>>>> 
>>>>>> "Pay It Forward"
>>>>>> 
>>>>>> "It only goes one way"
>>>>>> 
>>>>>> Dave W
>>>>>> '59 :{)
>>>>>> '59 MGA 1550
>>>>>> Burlington WI
>>>>>> ------------------------
>>>>>> 
>>>>>> 
>>> 
>>> 
>>> -- 
>>> "Pay if forward" in honor of Frank Clarici III, Spritenut
>>> 
>>> 
>>> ------------------------
>>> 
>>> spridgets at autox.team.net
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation: $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
>>> 
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/dwoerpel@wi.net
>> ------------------------
>> 
>> spridgets at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation: $12.75
>> 
>> Archive: http://www.team.net/pipermail/spridgets  http://autox.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/pvanwig@mac.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spridgets/attachments/20200420/98d68669/attachment-0001.htm>