[Spridgets] Spridget hoods?
refisk at chartermi.net
Sat Feb 22 19:49:28 MST 2020
We just use a broomstick, no prop rods. Or....no hinges, just pins. :-)
Sent from my keyboard
> On Feb 22, 2020, at 9:40 PM, "crusaderchuck55 at aol.com" <crusaderchuck55 at aol.com> wrote:
> My aplication only has 2 bolts (70 Midget) and the 2 rust free hoods I recieved today have 4 bolt holes per side like my bugeye hinges use.
> So ok 2 per side should line up.
> Btw,the 2 hoods are prop rod hoods and my application originally used the telescopic support thingy. Since both types of hood support depended upon mounting to the right fender lip , which with fiberglass fenders I can not use either support....but I might be able to use the prop rod somehow. The telescopic one is completely out.
> Thank you!
> The 1 hood is off a race car with pin holes & plates on 4 corners.
> Sent from my LG Mobile
> ------ Original message------
> From: Rick Fisk
> Date: Sat, Feb 22, 2020 9:16 PM
> To: crusaderchuck55 at aol.com;
> Cc: spridgets at autox.team.net;EasternOshitGroup at groups.io;
> Subject:Re: [Spridgets] Spridget hoods?
> They all match up no matter what type of hood or hinge.
> Sent from my keyboard
>> On Feb 22, 2020, at 9:05 PM, crusaderchuck55--- via Spridgets <spridgets at autox.team.net> wrote:
>> Do early hoods for the 4 bolt style hinge fit into a later scissors type hood hinge?
>> What I'm curious about is , do 2 of the 4 threaded bolt holes for early hinges match up to the later hinges? Or , do I need to modify an early hood to fit a later car with reguard to the hinges?
>> Thank you...all!
>> Sent from my LG Mobile
>> spridgets at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation: $12.75
>> Archive: http://www.team.net/pipermail/spridgets http://autox.team.net/archive
>> Unsubscribe/Manage: http://firstname.lastname@example.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Spridgets