[Tigers] Instrument O-Rings

[CoolVT at aol.com]

On installing the cubby box....it's been years, but I think I used  very 
short screws and attached small blocks of wood to the back of the dash in  
appropriate locations, put the box in place and then used screws from the inside  of 
the box into the blocks of wood.  I then used a black magic markers to  color 
the screw heads black.  I'm pretty sure that's how I did it. It's  attached in 
a solid manner with nothing showing and I know I didn't remove the  dash to 
do it.
Mark



************************************** See what's new at http://www.aol.com