[Tigers] Crossmember install

[DJoh797014 at aol.com]

If your upper A-arma are hitting the frame, it a good indication
that your shock towers have sagged inwards.   A common  problem
with Tigers and Mustangs.  Since your cross member is off
measure the distance between the towers.  The shop manual  has
the measuremenst.  A good frameshop can press them back out.  
If you have not done so, read the Tech tips on reinforcing the shock 
towers.  Sagging shock towers is not a big deal.  All  Tigers
eventually get this problem.
 
I strongly recommend making and installing John Logan's tech
tip about reinforcing the lower fulcrum pin
 
 
In a message dated 12/10/2008 1:37:16 P.M. Central Standard Time,  
CoolVT at aol.com writes:

I've had  my crossmember in and out a few times, but always with the  A-arms  
off.  In trying to install it now with the A arms on I can't find  an  angle 
to 
squeeze it in...A-arms hitting on frame rail.  Okay  guys, what's  the trick? 
 
It came out okay in one  piece:-)
M
**************Make your life easier with all your friends,  email, and 
favorite sites in one place.  Try it now.  
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom0000001
0)
Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive


**************Make your life easier with all your friends, email, and 
favorite sites in one place.  Try it now. 
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000010)