[Tigers] radiator dimensions

[Steve Laifman]

Tim,

Read my article "Cool It, Buddy" on TigersUnited.com.  It describes the 
dimensions of my hi-po 4 row radiator that does fit the stock tanks, 
mounting, and clearance in dimensions and count.

http://www.tigersunited.com/techtips/SteveLaifmanValance/pt-SteveLaifmanValance1.asp

Steve

___
Steve Laifman
Editor - TigersUnited.com



Tim Webster wrote:
> Fellow listers,
>
> I am embroiled in a showdown with the local rad man. I took him my original
> Tiger radiator in poor condition and asked if he could faithfully make a copy.
> No problem I was assured. For $500 I had it done. When I went install it I
> discovered it was way out of square. I took it back and had that fixed. On the
> next attempt it became obvious that the new rad was too big, in particular to
> deep. The bottom hose outlet sits firmly on the bellows and at that top it
> sits proud, so much so the shroud doesn't fit and the hood won't close.
>
> I need to know what the original outside dimensions (length x width) were
> before I take it back. Unfortunately I neglected to make a template of the
> original.
>
> Thanks,
>
> Tim
> 9470694