[Tigers] Brake pressure switch

[Ron Fraser]

Bob
	Yes, there are replacements available; check with Sunbeam
Specialties and Classic Sunbeam.

The thread on this switch is 3/8 x 24 not the more common pipe thread style
so finding one at the local auto parts store could be difficult except maybe
a  foreign auto parts store.

If you are using silicone brake fluid you may experience a higher rate of
failure of these switches.

I installed an electrical switch at the brake pedal for safety reasons, the
brake lights come on quicker, and it became mandatory when I installed a
cruise control system.

Ron Fraser


-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Robert J. Wanty
Sent: Monday, November 03, 2008 7:08 AM
To: tigers at autox.team.net
Subject: [Tigers] Brake pressure switch


My brake system is in its original configuration ( I know I have a death
wish) and the pressure switch has expired. Before I try to unscrew it and
either strip or break it are there replacements available or should I cobble
a peddle switch?



Bob

B382001318
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.8.5/1762 - Release Date: 11/2/2008
9:51 AM