[Tigers] Rear Sway Bar

[MWood24020 at aol.com]

When I first started autocrossing my car, I ran the 7/8" solid front bar  
with an aftermarket Addco rear bar of undetermined diameter. The location  
hardware on the bar was sketchy and not well located, but even so the increase 
 in rear roll stiffness was significant. Even with the rear Konis at full  
soft,  the car had too much oversteer and the experiment with the rear bar  
ended quickly. Ultimately, I fell into the camp of wanting as much 
compliance as  possible in the rear suspension, basically just trailing along behind 
the front,  and doing my suspension tuning with just the front end, with 
rear shock  adjustment at the margin.
 
Mike
 
 
In a message dated 9/15/2009 12:32:58 A.M. Pacific Daylight Time,  
maliburevue at yahoo.com writes:

Does  anyone out there run a rear sway bar? Details? Likes/dislikes? If so,
what  size front sway bar do you run with  it?
You are subscribed as  mwood24020 at aol.com

Tigers at autox.team.net
http://autox.team.net/mailman/listinfo/tigers

http://www.team.net/archive