[Tigers] Tiger Engine Installation Techniques Re: just a test

[Scott Hutchinson]

When I did it I took it out the bottom. Wasn't bad at all. 

I used a strap that I wrapped around the cowling braces and lifted the body. 

Take lots of pictures along the way so you know how to put it back together. 

I placed a board on the jack when I removed the cross member. I seem to recall I left the wheels on it and just rolled it out from under the front of the car. The car is on stands at that point. Then you jack the engine and unbolt it and the tranny and slide the whole package out through the left front wheel well. 

Somewhere there was a step by step list on how to do it. 

I think the issue with taking it out the top is vertical lift clearance. 

Have fun. ;). 


Scott Hutchinson
Director of Operations
NetJets Large Aircraft

Office 860.292.1191
Mobile 843.290.2805

*** *******
This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error,  please advise the sender by reply e-mail and delete the message.