[Tigers] Best Clutch Kit 289

Smit, Theo Theo.Smit at dynastream.com
Tue Apr 13 07:58:46 MDT 2010


Greg,
Did you ever own B382002705? It had two or three big holes cut into the
transmission tunnel... I welded patches back in. Not the prettiest job but
it's better than the unstoppable draft from the engine compartment.
Cheers,
Theo

> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-
> bounces at autox.team.net] On Behalf Of Greg Koss
> Sent: April 13, 2010 6:21 AM
> To: TIGERS at autox.team.net
> Subject: Re: [Tigers] Best Clutch Kit 289
>
> Yes, the clutch can be replaced without removing the engine.  During my
> "no
> money " college days, I replaced the clutch in my driveway, by myself,
> lying
> on the ground.  The shifter and linkage must be removed from the
> transmission,
> the trans must be separated from the bell housing.  I believe I may
> have cut
> holes in tunnel to access top bolts.  Boy! Toploaders are heavy lying
> on your
> back.
>


-----------------------------------------------------------------------------
---
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.


More information about the Tigers mailing list