[Tigers] Rear Brake Shoe Drag

[Ron Fraser]

Brad
	The stainless steel hoses should not have this problem as far as I
know.
Check to make sure the rear wheel cylinders can float.   They are in a slot
and are suppose to float back and forth some.
I would also bled the lines and make sure there is no contamination in the
fluid.

Ron Fraser

-----Original Message-----
From: Hall Motors [mailto:hallmotors at cox.net] 
Sent: Saturday, April 17, 2010 11:43 AM
To: rfraser at bluefrog.com; 'Randy Smith'; tigers at autox.team.net
Subject: RE: [Tigers] Rear Brake Shoe Drag


Thanks to all; I've had the drums off and inspected the shoes, etc., but
hadn't considered the flexible line.  All three (2 up front and 1 in back)
are the stainless steel style and I don't know when they were installed
(I've had the car for two years).  Do the stainless style flexible lines
have rubber liners; if not, are they still subject to the same constriction
problem?

Thanks Again, 
Brad Hall
B382000609LRXFE