[Tigers] Intake Manifold Plumbing

[michael king]

The temp sender on the stock tiger setup is in a T block in the hoses, many
thermostat housings have the provision for the sender.. but the stock
location is in the T fitting.. i do remember chat some time ago as to why
thats not great.. but cant remember the reason.

On 28 April 2010 07:54, Jeff Francis <jkfqualbldg at cox.net> wrote:

> I just swapped out manifolds with my '77 Bronco since the Bronco had a
> Performer 289 on it and I need to get an insulating spacer on it as I'm
> boiling gas in the bowls of the tiger....  Anyway,  the tiger had the temp.
> sender by the thermostat and the heater hose connection by the driverside
> head, and the Bronco was the other way.  Which way is "correct"?  Seems to
> me
> that you would get a more accurate temp. reading from both heads with the
> sender by the thermostat.  Imput would be appreciated.  Thanks,  Jeff
> Francis
> - VA Beach, VA
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/michael.s.king@gmail.com
>
>


-- 
Regards

Michael King