[Tigers] Wiper motor wiring

[Bob Dixon]

Looking at the nice color drawing more closely it looks like Red goes
to 3 and Brown to 2.  I'm not blind, I just can't see.


On Wed, 02 Feb 2011 15:17:46 -0700, Bob Dixon <bobdixon at frii.com>
wrote:
> Thanks for the details.  I have a hard copy of the Rootes Factory
> Workshop Manual and that is what I was going off of.  The color diagram
> on the Tigers United page does not seem to indicate which terminals on
> the switch to attach the wires so it didn't help me even though it is
> pretty.
> 
> I just wanted to make sure I understood how it works.  I'll Ohm out my
> switch tonight to see which terminals connect to what at the different
> position of the switch.  I'm not confident the correct switches were
> with my Tiger when I got it.
> 
> Since it doesn't seem to be explained anywhere I can find, is one of
> the wires grounded in one position and the other wire grounded in the
> second postion?  Or, is one of the wires grounded in one position and
> both wires grounded in the second position.  These switches seem to
> allow either way.  
> 
> I'll do some experimenting tonight.
> 
> Thanks,
> Bob