[Tigers] Ford / Mazda 5speed transmission

[allfudge1635 at gmail.com]

Gary,
This is the Mazda transmission made for the Ford 302, used in the F150, Bronco and others starting in 1988. Thomas Witt really answered my question; first gear is way too low (3.75) to be of any use.
Al
Sent on the Sprint. Now Network from my BlackBerry.

-----Original Message-----
From: Gary Winblad <garywinblad at comcast.net>
Sender: tigers-bounces at autox.team.net
Date: Fri, 25 Feb 2011 00:58:41 
To: Thomas Witt<atwittsend at verizon.net>
Cc: <tigers at autox.team.net>
Subject: Re: [Tigers] Ford / Mazda 5speed transmission

Uh, am I the only one that doesn't have clue which Mazda transmission
you guys are talking about?
What car does it come from?  Its a T-5 I assume...
Gary

----- Original Message -----
From: Thomas Witt <atwittsend at verizon.net>
To: tigers at autox.team.net
Sent: Thu, 24 Feb 2011 21:15:36 -0000 (UTC)
Subject: Re: [Tigers] Ford / Mazda 5speed transmission

Al,

The ratios in that Mazda transmission are: 3.75, 2.32, 1.43, 1.00, 0.75 . 
The 2.32 2nd gear in that transmission is 1st gear in a close ratio 
Toploader.  Most seem to find the 2.78 1st gear of the wide ratio to be very 
good.  I believe (but might need correction) that the ratios Tom Hall uses 
have the 2.95 1st gear (rather close). So, the 3.75 Mazda 1st gear is W-A-Y 
out there.  The .75 5th will probably drop you 600-700 RPM on the highway. 
This could put your engine out of its torque range depending upon the build.

 I've also heard the Mazda/Ford transmission isn't very reliable (this 
according to the rednecks up the street).  My inclination would be to 
consider a different transmission based on ratio spread, and reliability.

Tom (Witt) 
_
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/tigers/allfudge1635@gmail.com