[Tigers] Exhaust pipe and clearance

[Dave Munroe]

There is some play in the engine mount where it bolts through the inner 
fender. Try loosening these bolts and see if you can move the engine enough 
to get the required clearance. I had this problem and it worked for me.

Dave

From: <brockctella at juno.com>
Sent: Sunday, February 27, 2011 1:47 PM
Subject: [Tigers] Exhaust pipe and clearance


 Put in new engine mounts due to sagging of old ones that allowed right
header to contact frame. Now this exhaust contacts the X frame where it
goes through the oval cutout. Any ideas on adjusting this? Thanks