[Tigers] Ballast resistor voltage
Carmods at aol.com
Carmods at aol.com
Mon Sep 26 09:27:18 MDT 2011
Hi Andy,
The voltage at the resistor will be lower when the points are closed than
when they are open due to the higher current going through it to the coil.
* Put a jumper wire from points terminal on the coil to ground.
* Measure the voltage between ground and the resistor to coil
terminal . As I remember, It should read around 6 to 6.9 volts.
awtiger at cox.net writes:
How much voltage should get through the ballast resistor going to the
points?
More information about the Tigers
mailing list