[Tigers] Brake Lines

[Smit, Theo]

You need to make sure that the flare type and the fittings all match. However,
if you get a flaring tool, it will usually be the standard double flare type,
and that is compatible with the tee and junction blocks you're most likely to
find at your local auto supply places.

At one point I bought some bubble flare line, then cut one end and put
standard double (inverted) flare on there to adapt the OEM brake lines to
stuff that is more commonly available.

Theo



This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.