[Tigers] Fwd: "vent window assembly" removal
AAAGLASSS at aol.com
AAAGLASSS at aol.com
Sat Mar 31 12:25:03 MDT 2012
Glass comes out at bottom of assembly. Take off handles, remove door
panel, Remove vent assembly, take off bottom bracket holding glass in. Glass
shops use packing tape to re assemble. In a pinch you can use electrical tape
to do this. You may have to go around the glass 2-3-4 times to get the
proper thickness. Assemble and then trim excess with razor blade. HTH
____________________________________
From: Rollright at aol.com
To: tigers at Autox.Team.Net
CC: onegonefish at comcast.net, todbrown at roadrunner.com
Sent: 3/31/2012 9:53:28 A.M. Pacific Daylight Time
Subj: [Tigers] "vent window assembly" removal
Hello,
Got the Tiger out of storage and brought it home today. Though raining
lightly, I had brought in last fall with the hard-top on. Made for a cozy
ride
home.
Grabbed the service manual and tried to find the section in the "Body",
section O the would tell me how to take out the "vent" window assembly. No
luck. not there.
Can anybody either tell me where it is in the manual, or if it actually
isn't there, how to get the A-frame vent window assemblies out?
Thanks in advance,
Jim Armstrong
Mk 1A
382002083
LRXFE
_______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/aaaglasss@aol.com
More information about the Tigers
mailing list