[Tigers] 1966 MK 1A Exhuast

[Larry Paulick]

At the time the SS Tri Delta's were not avaliable, but it is a good 
choice, although I have experienced no deteriation of the muffs 
(remember to drill 1/8" holes in muffs to allow drainage of water, that 
is very acid, to increase life of muffs).  Yes, I added an "H" pipe that 
is shown in the article 
http://tigersunited.com/techtips/PaulickExhaust/pt-PaulickExhaust1.asp.  
The tips are cut just short of the bumpers, so you don't catch your legs 
on them.

Larry

On 2/12/13 4:17 PM, RObin Young wrote:
> Joel, I copied Larry's set up and it turned out well.  I used the Tri- Delta
> stainless Flowmasters and they sounded great under a load but were  quiet at
> idle and cruise.  Not sure if Larry used a cross over tube but, it goes 17"
> behind the exhaust valve. With headers, this occurs just behind the
> collector.  I used a flanged, stainless 1" tube. Everything is available
> online at Aircraft Spruce for the stainless tube, flanges and gaskets if you
> like the idea. RObin
>
> -----Original Message-----
> Larry Paulicks High Performance Tiger Exhaust System write up shows Series
> 50
> Delta Flowmaster mufflers.B  The 50 series changes from the aggressive (40
> Series) to moderate sound in the 50 series, which indicates the elimination
> of
> the bdrownb sound at highway speeds b good thing.
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/lpaulick1@verizon.net