[Tigers] Correct battery sizing

[Lynn]

I have an original vent tube.  It basically looks like drip tube (used in a
garden) but softer and more pliable.  It has probably 1/8 holes spread just
far enough to connect to the vent caps

Lynn

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Ron Fraser
Sent: Friday, February 15, 2013 2:55 PM
To: 'Will Seay'; 'James Lindner'; 'Tom Hall'; 'Tiger Man'
Cc: 'Tiger e-mail List'
Subject: Re: [Tigers] Correct battery sizing

Will
	That is a good point for originality.  Does anyone have a good close
up picture of the original vent tube and the original battery caps?

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Will Seay
Sent: Friday, February 15, 2013 11:25 AM
To: 'James Lindner'; 'Tom Hall'; 'Tiger Man'
Cc: 'Tiger e-mail List'
Subject: Re: [Tigers] Correct battery sizing


If you're a stickler for originality, don't forget that the original battery
was vented.  Each of the six filler caps on the original battery had a
nipple that connected to a vent tube.  The vent tube ran through a hole in
the bottom of the trunk.  You can reproduce the vent tube fairly easily
because it's just a rubber tube with six holes in it and a plug in one end.
The tough part is the filler caps with the nipples.


Will Seay -382001570
wseay at embarqmail.com
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/cars@wt-inc.com