[Tigers] Temp sender plug on stock intake

[Sandy]

Andy

Should be just pipe thread. You can find them in the hardware stores 
sometimes in brass if you don't mind the change in materials. Hex is 
more common these days as well.

Sandy

On 5/1/2014 8:44 AM, Ron Fraser wrote:
> Andy
> 	Mine has a steel square headed plug.  I believe Ford used a standard
> pipe thread here but not totally sure.
>
> Ron Fraser
>
> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
> On Behalf Of awtiger at cox.net
> Sent: Thursday, May 01, 2014 10:52 AM
> To: tigers at autox.team.net
> Subject: [Tigers] Temp sender plug on stock intake
>
>
> Guys:
>
> I am missing the plug that goes in the intake hole on my Tiger where a temp
> sensor would go on a regular application.  Is there anything special about
> the plug?  Is it just a square-headed plug or an allen head?  I'm trying to
> adhere to originality and definitely want to install the original style of
> plug.  Would someone please point me in the right direction?
>
> Thanks,
> Andy Walker
> Edmond, OK
> B382001600LRXFE
> TAC #740
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4570 / Virus Database: 3931/7424 - Release Date: 05/01/14
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/sganz@pacbell.net