[Tigers] Tiger blower motor

[Ron Fraser]

	Just remove the shifter boot and you will have a constant flow of
heat. :)

Generally the problem with the blower motor is that the bushings seize to
the motor shaft.  You can get inside the motor but you need to be a bit
careful pulling it apart.  Remove the bushings from the shaft, clean them,
soak them in oil, clean the motor shaft, assemble the blower motor.

Ron Fraser

-----Original Message-----
From: Tigers [mailto:tigers-bounces at autox.team.net] On Behalf Of Owain Lloyd
Sent: Sunday, November 30, 2014 11:42 PM
To: Tom Witt
Cc: tigers at autox.team.net
Subject: Re: [Tigers] Tiger blower motor


where do you live?  can't you just change down a gear? :)  I don't remember
ever once turning on my (perfectly functional, i think) blower motor! I've
never being cold in the tiger despite plenty of trips below freezing.