[Tigers] FE and Frame Update

[daniel doornbos]

All I took a min tonight.  Sure enough it was called correctly the cross member is bent/compressed at the frame mounting point on the drivers side.


I measured the cross member to frame bolt holes of the frame, stock cross member and the Mike H cross member.  All three have the same dimension (taken with a tape measure so might be 1/8-1/4 off with centers).  Front and rear across were 22 1/2 and 24.


Here's a link to a few more photos

https://goo.gl/photos/kSup3JxRnhgktNX78


thanks

dan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160903/d15fc91f/attachment.html>