[Tigers] Distributor continued

[Stu]

Ok, I got the distributor out, cleaned everything up, and went to put it
back in.  Problem.  It will only go all the way down with the gear one
tooth off from where it came out.  If I start putting it in with the rotor
pointing where it stopped as I pulled it out, the gear engages and it looks
like it will rotate into the right position, but it won't go down all the
way.  If I start with it one tooth ccw, it goes in just fine, but the rotor
is not in the original position.  I took a "before" picture before I pulled
it out, so I know where the rotor was pointing.

Nothing has moved,  the tranny is in neutral, no power on at all.  I'm
assuming that this must relate to the oil pump drive not engaging.  What do
I do now?

Stu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170526/ddcdb7e3/attachment.html>